logo ssifex 1

SUSTAINABLE SOLUTIONS for construction

SSIFEX IF-EE FINO

GYPSUM TYPE: B1 / C4 / C5 / C6

SSIFEX IF-EE FINO

 Particulièrement adapté pour le plâtrage, le blanchiment et le revêtement de finitions. Il offre des propriétés d’isolation thermique et acoustique, d’efficacité énergétique et de protection passive contre l’incendie. C’est la meilleure alternative naturelle pour lisser le gotelé ou le stuc. Résistant aux environnements marins. Avec une grande dureté, une résistance mécanique et une finition très esthétique.

Most important advantages:

•Natural origin.
•Ecological and recyclable.
•Adhesion and malleability.
•Thermal insulator.
•Protection against fire.
•Humidity regulation.

aplicaciones

MODIFIED MORTAR SIFEX IF ‐ EE FINE
REGULATIONS:
YG classification according to the UNE EN 13279-1: 2009 standard;
Fire resistance according to the standards: UNE EN 13501-2: 2009 + A1: 2010;
UNE EN 1364-1: 2019; UNE-ENV 13381-4: 2014; UNE EN 1363-1: 2015
Energy Efficiency UNE EN 14303: 2017
Thermal Resistance UNE EN 12667;
Acoustic Absorption UNE EN ISO 16283-1: 201

It is a slow-setting construction mortar, manually applied, produced from calcium sulphate (gypsum) and used for covering ceilings, interior and exterior walls, on all types of substrates.

Its use time is regulated in the factory, ensuring reduced waiting times and longer use time, which favours the achievement of high productivity on site and excellent hardness with high values in thermal and mechanical resistance. Given its high density, it provides excellent thermal and acoustic insulation, is a humidity regulator, great protection against fire, being fireproof, and withstanding temperatures of more than 1000ºC depending on the thickness.

It is 100% recyclable and biodegradable, with a saving in water consumption of up to 50%, depending on the geographical area. Ecological and totally non-combustible. Resistant to shock and pressure waves. Thanks to its mechanical characteristics, it provides an improvement in energy efficiency. It does not contain any toxic or dangerous resistance.

Product manufactured with 100% renewable energies.

Advantages:

Economical

It does not undergo plastic drying shrinkage, therefore, there is no cracking, unlike other materials, such as cement-based stucco.

High compressive strength and excellent adhesion to ceramic materials, stone, polymers, wood and resins.

High productivity on site, reduction of debris and easy handling.

It is environmentally friendly, as it does not contain any petroleum derivatives or polymer fibres.

It is environmentally friendly, as, in addition to being ecological, it reduces water consumption by 50%.

Fast hardening process, in less than 24 hours it can be ready for cladding. In the case of surfaces to be painted, the first coat can be applied after 5 hours.

Depending on the thickness, it can function as an acoustic insulator, in a percentage of the order of 25Db, for certain frequencies.

Easy to apply with traditional means.

Rapid progress of the work, as in the case of being used as rendering, the finish can be applied in less than 24 hours.

Increases the value of the building, due to its qualities.

– Economical

 – It does not undergo plastic drying shrinkage, therefore, there is no cracking, unlike other materials, such as cement-based stucco.

– High compressive strength and excellent adhesion to ceramic materials, stone, polymers, wood and resins.

– High productivity on site, reduction of debris and easy handling.

– It is environmentally friendly, as it does not contain any petroleum derivatives or polymer fibres.

– It is environmentally friendly, as, in addition to being ecological, it reduces water consumption by 50%.

– Fast hardening process, in less than 24 hours it can be ready for cladding. In the case of surfaces to be painted, the first coat can be applied after 5 hours.

– Depending on the thickness, it can function as an acoustic insulator, in a percentage of the order of 25Db, for certain frequencies.

– Easy to apply with traditional means.

– Rapid progress of the work, as in the case of being used as rendering, the finish can be applied in less than 24 hours.

– Increases the value of the building, due to its qualities.

Instructions for use:

Pour the gypsum over the water, until the water is moistened, knead with a mechanical stirrer until the paste is homogenised (water/gypsum ratio = (0.35- 0.50). Under no circumstances should additives be added as they may alter the setting process and the final strength of the product. Water should not be added after the product has set, as this may alter the final strength of the product. Clean water with a temperature above 5ºC and below 40ºC must be used.

Downloads:

Technical Data Sheet
EC Declaration of Conformity
Safety Data Sheet

gerencia@ssifexsecurit.com                                                                   © 2020, Ssifex Securit, S.L. All Rights Reserved.